Banana Pi Pro (1G CPU, 1G RAM, SATA 2.0, Gigabit Ethernet, WIFI)

Banana Pro™ is an updated version of Banana Pi™ designed by the LeMaker Team. Try Banana Pro™ today and take advantage of the many enhanced features. Hardware Specification of Banana ProTM Soc: Allwinner® A20(sun 7i) CPU: ARM® Cortex™-A7 Dual-Core1GHz (ARM v7 instruction set) GPU: Mali400MP2 Complies with OpenGL ES 2.0/1.1 (hardware acceleration support) SDRAM: 1GB DDR3 (shared with GPU) Power: 5V @ 2A via MicroUSB (DC in Only) and/or MicroUSB (OTG) PMU: AXP209 Features Low-level perpherials: 40 Pins Header, 28×GPIO, some of which can be used for specific functions including UART, I2C, SPI, PWM, CAN, I2S, SPDIF, LRADC, ADC, LINE-IN,FM-IN,HP-IN. On board Network: 10/100/1000Mbps ethernet (Realtek RTL8211E/D) Wifi Module: WiFi 802.11 b/g/n On board Storage; MicroSD (TF) card，SATA 2.0 Display; Supports multi-channel HD display: HDMI 1.4 (Type A - full) LVDS/RGB/CPU display interface (DSI) for raw LCD panels Composite video (PAL and NTSC) (via 3.5 mm TRRS jack shared with audio out) 11 HDMI resolutions from 640×480 to 1920×1080 plus various PAL and NTSC standards Video: HD H.264 2160p video decoding Mutil-format FHD video decoding, including Mpeg1/2, Mpeg4, H.263, H.264, etc H.264 high profile 1080p@30fps or 720p@60fps encoding Audio outputs:HDMI,analog audio (via 3.5 mm TRRS jack shared with composite video out),I2S audio (also potentially for audio input) Camera: Parallel 8-bit camera interface Audio input: On board micphone USB: 2 USB 2.0 host, 1 USB 2.0 OTG (all direct from A20 chip) Buttons: Reset button Power button: U-boot button Leds: Power status led (red) User defined led1 (green, user can control) User defined led2 (blue, user can control) Other: IR reciever CCS-8100 - We specialize in Electronics, Computer, Cell Phone Accessories, Professional Signal Conversion Devices, Adapter & Cables Pickup Location: "Cable Link" Tel: 613-680-6188